The ROL3480-C stepper driver adopts the new generation 32-bit DSP technology, combined with CANopen bus control functions, supporting the CIA301 protocol and CIA402.V2 sub-protocol. It can support up to 32 axes, enabling multi-axis high-speed bus synchronous control. The driver supports position mode, speed mode, and homing mode. The standardized protocol makes the entire control system more stable and reliable, while the simple field wiring effectively avoids pulse loss issues commonly seen in traditional drivers in interference environments.
Features
Voltage input range: DC 30V to 110V / AC 20V to 80V Maximum peak current: 8A Communication interface: CANopen Communication protocol: CiA301 and CiA402 sub-protocols Automatic motor parameter tuning function Features overvoltage, overcurrent, and other protection functions
Specifications
Technical parameter
Voltage input range: DC30V~110V/Ac20V~80V
Maximum peak current: 8A
Communication interface: CANopen
Communication protocol: CiA301 and CiA402 sub-protocol
Motor parameter auto-tuning function
With overvoltage, overcurrent and other protectionfunctions.
Environmental parameters
Storage temperature: -20ยฐC~65ยฐC(no frost)
Operating temperature: 0ยฐC~45ยฐC
Operating humidity: below 90%RH (no condensation)
Vibration frequency: less than 0.5G (4.9m/s2), 10~60 Hz(non-continuous operation)
Installation environment: no corrosive gas, flammable gas,oil mist or dust, etc.
Drive function description
Technical Data
Paramter setting
ROL3480-C driver supports CANopen bus, with a total of 8 dial switches,which can be used to set Set the CANopen station number, communicationbaud rate, and terminal resistance, as shown in the following table:
