The Runcin CANopen Bus Stepper Driver ROL2350-C stepper driver adopts the new generation 32-bit DSP technology, combined with CANopen bus control functions, supporting the CIA301 protocol and CIA402.V2 sub-protocol. It can support up to 32 axes, enabling multi-axis high-speed bus synchronous control. The driver supports position mode, speed mode, and homing mode. The standardized protocol makes the entire control system more stable and reliable, while the simple field wiring effectively avoids pulse loss issues commonly seen in traditional drivers in interference environments.
Features Voltage input range: DC24V to 50V Maximum peak current: 5A Communication interface: CANopen Communication protocol: CiA301 and CiA402 sub-protocols Automatic motor parameter tuning function Features overvoltage, overcurrent, and other protection functions
Specifications
Technical parameter
Voltage input range: DC24V~50V
Maximum peak current: 5A
Communication interface: CANopen
Communication protocol: CiA301 and CiA402 sub-protocol
Motor parameter auto-tuning function
With overvoltage, overcurrent and other protectionfunctions.
Environmental parameters
Storage temperature: -20ยฐC~65ยฐC(no frost)
Operating temperature: 0ยฐC~45ยฐC
Operating humidity: below 90%RH (no condensation)
Vibration frequency: less than 0.5G (4.9m/s2), 10~60 Hz(non-continuous operation)
Installation environment: no corrosive gas, flammable gas,oil mist or dust, etc.
Drive function description
Technical Data
Paramter setting
ROL2350-C driver supports CANopen bus, with a total of 8 dial switches, which can be used to set CANopen staฦon number, communicaฦon baud rate, and terminal resistance, as shown in the following table:
